#mii-diag eth0


Basic registers of MII PHY #1:  3100 786d 2000 5c21 05e1 0021 0004 2001.
 Basic mode control register 0x3100: Auto-negotiation enabled.
 You have link beat, and everything is working OK.
 Your link partner is generating 10baseT link beat  (no autonegotiation).
   End of basic transceiver information.

#mii-tool -v


eth0: no autonegotiation, 10baseT-HD, link ok
  product info: vendor 08:00:17, model 2 rev 1
  basic mode:   autonegotiation enabled
  basic status: autonegotiation complete, link ok
  capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
  advertising:  100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control
  link partner: 10baseT-HD

#natsemi-diag -aa


natsemi-diag.c:v2.04 1/8/2001 Donald Becker (becker@scyld.com)
 http://www.scyld.com/diag/index.html
Index #1: Found a NatSemi DP83815 adapter at 0xac00.
NatSemi chip registers at 0xac00
 0x000: 00000004 8805e000 00000002 00000000 00000000 00f1cd65 00000001 00000000
 0x020: 099e04a0 10f01002 00000000 00000000 099e0200 00700020 00000000 00008000
 0x040: 0200020b 00200000 c8200000 00000200 ffff0004 3f3f3f3f 00000403 00000000
 0x060: 00000001 00000000 00000000 00000000 00000000 00000000 00000000 00000000
 0x080: 00003100 0000786d 00002000 00005c21 000005e1 00000021 00000004 00002001
 0x0A0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
 0x0C0: 00000013 00000002 00000000 00000000 00000000 00000000 00000100 00000030
 0x0E0: 00000000 0000003f 00000804 00008200 00000000 00000000 00000000 00000000
  No interrupt sources are pending (0000).
  Rx filter address is 0xc8200000, data is 0200.
  Receive  mode is 0xc8200000: Normal unicast and hashed multicast.
   Rx filter index 0 is 0200 
   Rx filter index 2 is 13e3
   Rx filter index 4 is fce3
   Rx filter index 6 is 0000
   Rx filter index 8 is 0000
   Rx filter index 10 is 0000
   Rx filter index 12 is 0000
   Rx filter index 14 is 0000
Index #2: Found a NatSemi DP83815 adapter at 0xa800.
NatSemi chip registers at 0xa800
 0x000: 00000004 8805e000 00000002 00000000 00000000 00f1cd65 00000001 00000000
 0x020: 09b8a400 10f01002 00000000 00000000 09b8a000 00700020 00000000 00000000
 0x040: 0000020b 00200000 c8200000 00000200 ffff0004 3f3f3f3f 00000302 00000000
 0x060: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
 0x080: 00003100 0000786d 00002000 00005c21 000005e1 00000021 00000004 00002001
 0x0A0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
 0x0C0: 00000013 00000002 00000000 00000000 00000000 00000000 00000100 00000030
 0x0E0: 00000000 0000003f 00000004 00008200 00000000 00000000 00000000 00000000
  No interrupt sources are pending (0000).
  Rx filter address is 0xc8200000, data is 0200.
  Receive  mode is 0xc8200000: Normal unicast and hashed multicast.
   Rx filter index 0 is 0200
   Rx filter index 2 is 04e3
   Rx filter index 4 is 808f
   Rx filter index 6 is 0000
   Rx filter index 8 is 0000
   Rx filter index 10 is 0000
   Rx filter index 12 is 0000
   Rx filter index 14 is 0000

#natsemi-diag -ee


natsemi-diag.c:v2.04 1/8/2001 Donald Becker (becker@scyld.com)
 http://www.scyld.com/diag/index.html
Index #1: Found a NatSemi DP83815 adapter at 0xac00.
  No interrupt sources are pending (0000).
  Rx filter address is 0xc8200000, data is 0200.
  Receive  mode is 0xc8200000: Normal unicast and hashed multicast.
   Rx filter index 0 is 0200
   Rx filter index 2 is 13e3
   Rx filter index 4 is fce3
   Rx filter index 6 is 0000
   Rx filter index 8 is 0000
   Rx filter index 10 is 0000
   Rx filter index 12 is 0000
   Rx filter index 14 is 0000
 EEPROM address length 6.
EEPROM contents:
   0x000:  1385 f311 0b34 41f3 0000 0000 0000 8100
   0x008:  89f1 fe71 1915 aa0d ffff ffff ffff ffff
   0x010:  ffff ffff ffff ffff ffff ffff ffff ffff
   0x018:  ffff ffff ffff ffff ffff ffff ffff ffff
   0x020:  ffff ffff ffff ffff ffff ffff ffff ffff
   0x028:  ffff ffff ffff ffff ffff ffff ffff ffff
   0x030:  ffff ffff ffff ffff ffff ffff ffff ffff
Decoded EEPROM contents:
  PCI Subsystem IDs -- Vendor 0x1385, Device 0xf311.
  PCI timer settings -- minimum grant 11, maximum latency 52.
  Wake-On-LAN password 00:00:00:00:00:00.
  Ethernet MAC Station Address 00:02:e3:13:e3:fc.
  EEPROM active region checksum read as aa0d, vs 0455 calculated value.
Index #2: Found a NatSemi DP83815 adapter at 0xa800.
  No interrupt sources are pending (0000).
  Rx filter address is 0xc8200000, data is 0200.
  Receive  mode is 0xc8200000: Normal unicast and hashed multicast.
   Rx filter index 0 is 0200
   Rx filter index 2 is 04e3
   Rx filter index 4 is 808f
   Rx filter index 6 is 0000
   Rx filter index 8 is 0000
   Rx filter index 10 is 0000
   Rx filter index 12 is 0000
   Rx filter index 14 is 0000
 EEPROM address length 6.
EEPROM contents:
   0x000:  1385 f311 0b34 41f3 0000 0000 0000 8100
   0x008:  8271 c047 1915 aa94 ffff ffff ffff ffff
   0x010:  ffff ffff ffff ffff ffff ffff ffff ffff
   0x018:  ffff ffff ffff ffff ffff ffff ffff ffff
   0x020:  ffff ffff ffff ffff ffff ffff ffff ffff
   0x028:  ffff ffff ffff ffff ffff ffff ffff ffff
   0x030:  ffff ffff ffff ffff ffff ffff ffff ffff
   0x038:  ffff ffff ffff ffff ffff ffff ffff ffff
Decoded EEPROM contents:
  PCI Subsystem IDs -- Vendor 0x1385, Device 0xf311.
  PCI timer settings -- minimum grant 11, maximum latency 52.
  Wake-On-LAN password 00:00:00:00:00:00.
  Ethernet MAC Station Address 00:02:e3:04:8f:80.
  EEPROM active region checksum read as aa94, vs f355 calculated value.

Valid HTML 4.01!